INDUSTRIAL TRAINING COURSES
Training provided throughout Okanagan Valley – Kelowna, Vernon, West Kelowna, Peachland, Summerland, Penticton, Okanagan Falls, Oliver, Osoyoos, and all of BC & Alberta.
FORKLIFT OPERATOR TRAINING
Forklift accidents are more common than people think and can happen in the blink of an eye. Below are reason why incidents may occur:
- Driving with the load elevated
- Improper backing up, turning, braking or accelerating
- Improper warnings and poor communication during shared tasks
- Narrow passages, obstacles, poor surface conditions
- Inadequate servicing of the forklift
- Horseplay, stunt driving, jerky, erratic driving
Through proper training and hazard assessments, these occurrences can be avoided.
The Forklift Training course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable behind the wheel. Courses all include: hands-on activities, video instruction, student participation, and a written practical test.
Forklift Operator Training (7 hours)
Learning objective of the Forklift Operator Course is to ensure students demonstrate and understand the following:
- Explore the potential dangers of forklift operations
- Worksite hazards
- Safe operations
- Control orientation
- Proper assessment of a forklift
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
TELEHANDLER OPERATOR TRAINING
3 common accidents are:
- Hitting or running over a pedestrian
- Damaging racking and nearby structures
- Tipovers and rollovers
A telehandler is somewhat like a forklift but has a boom extension (telescopic cylinder). The increased versatility of a single telescopic or articulating boom that can extend forwards and upwards from the vehicle. Can also be called a zoom boom or rough terrain forklift.
The Telehandler Training course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable behind the wheel. Courses all include: video and classroom instruction, student participation and a practical test.
Telehandler Operator Training (7 hours)
Learning objective of the Forklift Operator Course is to ensure students demonstrate and understand the following:
- Explore the potential dangers of telehandler operations
- Worksite hazards
- Safe operations
- Control orientation
- Proper assessment of a telehandler
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
NARROW AISLE FORKLIFT OPERATOR TRAINING
Due to improper training and hazard assessments – accidents are common with the operation of Narrow Aisle Forklifts. Occurrences may happen due to minimal aisle space, lack of communication, cluttered aisles, driving with an elevated load and poor surface conditions
The Narrow Aisle Forklift Operator Training course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable behind the wheel. Courses all include: hands-on activities, video instruction, student participation and a written practical test.
Narrow Aisle Forklift Operator Training (7 hours)
Learning objective of the Narrow Aisle Forklift Operator Course is to ensure students demonstrate and understand the following:
- Explore the potential dangers of narrow aisle forklift operations
- Worksite hazards
- Safe operations
- Control orientation
- Proper assessment of a narrow aisle forklift
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
ELEVATED WORK PLATFORM BOOM LIFT / SCISSOR LIFT OPERATOR TRAINING
Operating an Elevated Work Platform (EWP) is a highly-skilled job that can be very dangerous if not performed properly. The following are a few hazards that are associated with operating these machines.
- Falls from heights
- Tipover / Collapse
- Objects falling from lifts
- Ejections from lift platforms
- Electrocutions
The Elevated Work Platform (EWP) supports a wide variety of tasks. It is used for any trade requiring over height work to be done. Our Elevated Work Platform (EWP) Training Course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable with the operation of an Elevated Work Platform (EWP). Courses all include video and classroom instruction, student participation and a practical test.
Elevated Work Platform Operator Training (7 hours)
Learning objective of the Elevated Work Platform Operator Course is to ensure students demonstrate and understand the following:
- Legislation and Standards
- Explore the potential dangers
- Worksite hazards
- Load limitations and calculations
- Stability
- Safe operations discussions
- Rescue and escape planning
- Pre-use and visual inspections
- Personal protective equipment requirements
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
WHEEL LOADER OPERATOR TRAINING
The operator is seated high in the machine, often making it challenging to view objects and people in the work area.
Common accidents are:
- Striking pedestrians while backing up
- Contact with objects
- Tipover
A front end loader is valuable and essential equipment used in various industries including agriculture, road building, mining, and construction. The loader is equipped with a bucket that can pick up large amounts of material to be transported easily before dumping. However, its size and turning radius make it difficult to maneuver.
The Wheel loader Training course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable behind the wheel. Courses all include video and classroom instruction, student participation and a practical test.
Wheel Loader Operator Training (7 hours)
Learning objective of the Wheel loader Operator Course is to ensure students demonstrate and understand the following:
- Explore the potential dangers of Wheel loader operations
- Worksite hazards
- Description of attachments
- Safe operation discussions
- Pre-inspection of a Wheel loader
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
SKID STEER OPERATOR TRAINING
Skid steers are a common piece of equipment found in a variety of industries. While they are small in size, the dangers can be great. It is critical to take time to recognize the hazards present during the operation of the skid steer so that the necessary best practices can be followed. A few challenges that make operating these machines hazardous are:
- Striking others while backing up
- Damaging equipment and structures
- Tipover
The skid steer is commonly equipped with a bucket for transporting materials. It can also be equipped with other attachments for various purposes. The Skid Steer Training course is intended for participants who are new to the trade or an experienced operator looking for re-certification to sharpen their skills.
Our experienced, certified instructors will help you become comfortable with the operation of a Skid Steer. Courses all include video and classroom instruction, student participation and a practical test.
Skid Steer Operator Training (7 hours)
Learning objectives of the Skid Steer Operator Course are to ensure students demonstrate and understand the following:
- Explore the potential dangers of Skid Steer operation
- Worksite hazards
- Description of attachments
- Safe operation discussions
- Pre-inspection of a Skid Steer
- Hands-on experience
- Wallet certification card
HOURS
ON-SITE TRAINING AVAILABLE
FALL PROTECTION TRAINING
A significant number of lost time injuries can be attributed to falls in the workplace. While the majority of falls occur on the same level with minor injuries, falls to a lower level usually result in more serious injuries or even death. Falls can be prevented through proper training.
Our Fall Protection Training Courses will provide participants with an understanding of their responsibilities when working in areas where fall hazards exist.
Our experienced, certified instructors offer three Fall Protection Training courses, to address your individual training needs. Courses all include hands-on activities, video instruction, student participation, and a written practical test.
Fall Protection Comprehensive (8 hours)
Fall Protection Group
This end user full-day program is designed for any worker performing duties where a fall hazard exists. The course will provide a more in-depth understanding of the use of fall protection as it relates to each at-height situation. The subject matter will identify which options may best suit your needs and give you the tools and knowledge to work at heights safely. (ie: trades, construction, roofer, iron and steelworkers, telecom specialists to name a few)
After completing the Comprehensive course, if a student requires a transfer to another province they can register online and complete the course within their jurisdiction.
Fall Protection Essentials (4 hours)
Fall Protection Group
This end user half-day program will allow you to understand the essentials of fall protection as it relates to the heights within your work environment. This course is suitable for individuals whose work surroundings are consistent. (ie: aerial platform, bucket truck, scissor lift)
BC Fall Protection (7 hours)
Fusion Safety Services Ltd.
This end user full-day program is aligned with Provincial legislation. British Columbia Fall Protection Course is recognized by BCCSA (British Columbia Construction Safety Alliance).
Features of Our Fall Protection Training Courses:
- Hazard Identification
- Fall Protection Oversight
- Fall Safety Systems and Planning
- Shared and Personal Systems
- Anchor Points – strength requirement, types
- Body Holding Devices – types and fitting
- Connectors – basic lanyards, energy absorbers and SRLs
- Equipment Care
- Hands-on Workshop
- Evaluation
- 3-year Certification
HOURS
ON-SITE TRAINING AVAILABLE
CONFINED SPACE TRAINING
Confined spaces can be more hazardous than regular workspaces for many reasons. Accidents can happen quickly, often resulting in death. Through proper hazard assessments and control programs, these incidents can be avoided.
Our course will provide participants with an understanding of their responsibilities when working in areas of confined spaces.
Our experienced, certified instructors are aligned with Provincial Legislation. British Columbia Confined Space Entry and Standby Personal course are recognized by BCCSA (British Columbia Construction Safety Alliance).
Courses all include hands-on activities, video instruction, student participation, and a written practical test.
Confined Space Training (6 hours)
Learning objective of the Confined Space Course is to ensure students demonstrate and understand the following:
- Confined Space Program requirements
- Definition of a Confined Space
- Training and competency requirements
- Recognition, evaluation, and control of hazards and completing a hazard assessment
- Classification of Confined Space Levels
- Legislation requirements (Safety and Protection)
- Hazardous Substances and Energy (Isolation)
- Testing and Atmosphere
- Ventilation and Purging
- Neutralization and Inerting
- Entry Permit System
3-year Certification